Why is it important to choose a cutting head for part processing

As the saying goes, a good sharpener never misses a lumberjack. The main idea is that sharpening the knife takes time, but does not delay cutting firewood. The metaphor is that by fully preparing in advance, one can accelerate work. And the same goes for our parts processing. So, why is it important to choose a cutting head for part processing?

Only by selecting the right and good cutting tools can we achieve the most ideal finished product effect. In order to provide customers with better service, we have invested heavily in hiring multiple skilled operators with more than five years of experience. To help us serve our customers, for example.

When machining holes, there are precision requirements for some assembly holes, and some industries also have strict precision requirements for threaded bottom holes. If it is a large-scale processing, considering efficiency, cost, and quality, the selection of drill bits is very important. For example, if a 5mm Fried Dough Twists drill is used to process a 6+0.10/0 hole, the wear hole of the drill will be smaller if only a few live drills are done, and the drill will have to be reground, which is not only inefficient, but also very expensive and difficult to assemble.

For example, the 5.05 Fried Dough Twists drill is different. At least hundreds of pieces can be processed and polished once, which is easier to assemble. But this type of drill bit is difficult to buy in the market. If there is a large demand, it can be customized at the tool factory. If the demand is not large, a slightly larger drill bit can be used to grind on the outer circle. The following are some non-standard Fried Dough Twists drills used by CNC machines. It can be seen that the spiral angle of the drill is different according to different processing materials. Of course, efficient drilling of qualified holes is not enough only with suitable drill bits, but also with ideal drill clamps.