What are the main requirements for the use environment of precision machining centers

The main requirements for the use environment of precision machining centers:

1. Environmental requirements for the location of the machining center: The precision machining location should be far away from the vibration source and avoid direct sunlight and thermal radiation. If there is a vibration source near the CNC machine tool to avoid the influence of moisture and airflow, anti vibration grooves should be set around the machining center. It will cause poor contact of electronic components, otherwise it will directly affect the machining accuracy and stability of CNC machine tools, affect the reliability of the machining center, and cause malfunctions.

2. Power requirements: Generally, machining centers are installed in machining workshops under poor operating conditions. Not only does the environmental temperature change greatly, but there are also many types of mechanical and electrical equipment. Therefore, the location of the installation of machining centers can cause significant fluctuations in the power grid, requiring strict control of power supply voltage. And maintain relative stability. The fluctuation of power supply voltage must be within the allowable range, otherwise it will affect the normal operation of the CNC system of the machining center.

3. Temperature conditions: The environmental temperature of the CNC machining center is below 30 degrees Celsius, generally speaking, the relative temperature is less than 80%. There is an exhaust fan or cold air fan inside the CNC control box, especially the central processing unit, which operates at a constant temperature or with minimal temperature difference to maintain electronic components. Excessive temperature and humidity will lead to a decrease in the lifespan of control system components, an increase in temperature and humidity, and an increase in faults and short circuits, Increased dust can cause bonding on integrated circuit boards.

4. Use precision machining centers according to the instructions: When users use machining centers, the settings of these machining center parameters are directly related to the dynamic characteristics of each component in the machining center. It is not allowed to arbitrarily change the parameters set by the manufacturer in the control system. Only the gap compensation parameter value can be adjusted according to the actual situation.