How to effectively check and maintain the gear reducer?

How to effectively view and maintain the gear reducer. Different lubricants stop mixing with each other. The orientation of the oil level screw, oil drain screw and ventilator is determined by the orientation of the device. Their relevant orientation can be determined by seeing the device orientation diagram of the gear reducer. The following Shanghai strong transmission gear reducer description first through the replacement of oil, oil level view, about the gear reducer with oil level screw plug, oil view and other aspects to elaborate.

1. About gear reducer with oil level plug

Check the oil level; the oil level plug.

2. Replacement of oil

After cooling, the viscosity of the oil increases and it is difficult to release the oil, so the gear reducer should change the oil at the running temperature. Block the power supply, to avoid electric shock! Wait for the gear reducer to cool down without incineration risk to stop!

3. matters need attention

Inject new oil with the same trademark; the oil quantity should be consistent with the location of the unit; check the oil level at the oil level screw; tighten the oil level plug and ventilator; keep the gear reducer warm; put an oil tray under the oil release plug, open the oil level plug, ventilator and the oil release plug, remove all the oil, and install the oil release plug.

4. View of the oil level

Block the power supply, to avoid electric shock! Wait for the gear reducer to cool; remove the oil level plug to check if the oil is fully filled; install the oil level plug.

5. View of oil

Block the power supply, to avoid electric shock! Wait for the gear reducer to cool; open the oil plug and take the oil sample; check the oil viscosity index; if the oil is dirty, replace quickly.