Precautions for Operating Horizontal Machining Centers at Dongguan CNC Precision Machining Factory

The horizontal machining center of Dongguan CNC Precision Machining Factory is mainly suitable for processing box parts. Its working principle is that after the workpiece is clamped once on the machining center, the computer can automatically select different cutting tools, change the spindle speed of the machine tool, and complete multiple processes of processing multiple surfaces of the workpiece in sequence. So what should be noted when using a horizontal machining center:

1. CNC horizontal machining centers are generally installed in machining workshops, which not only have significant environmental temperature changes and poor operating conditions, but also have a wide variety of mechanical and electrical equipment, causing significant fluctuations in the power grid. Therefore, the installation position of the machining center requires strict control of the power supply voltage. The fluctuation of power supply voltage must be within the allowable range and remain relatively stable. Otherwise, it will affect the normal operation of the CNC system of the machining center.

2. Keep away from vibration sources, avoid direct sunlight and thermal radiation, and avoid the effects of moisture and airflow. If there is a vibration source near the CNC machine tool, anti vibration grooves should be set up around the machining center. Otherwise, it will directly affect the machining accuracy and stability of CNC machine tools, causing poor contact and failure of electronic components, and affecting the reliability of the machining center.

3. The ambient temperature of Dongguan CNC Precision Processing Factory is below 30 degrees Celsius, and the relative temperature is below 80%. The CNC control box is equipped with exhaust fans or cooling fans to keep the working temperature of electronic components, especially the central processing unit, constant or with minimal temperature difference changes. Excessive temperature and humidity can shorten the lifespan of control system components and lead to increased failures. The increase in temperature and humidity, as well as the increase in dust, can cause bonding and short circuits on integrated circuit boards.